Insulation Pins / Fixing Clips
Main applications
pins and clips for an installation free of sagging and fiber release
Key Features
Pins made for fixing insulation
Stud-type insulation pins driven through the insulation — preventing fiber release, sagging and fall-out at source
Positive fixing with clips
Dedicated fixing clips (caps) press onto the pin, holding the insulation firmly
Durable at temperature
Stainless or galvanised steel — no distortion or corrosion in hot insulation installations
Fast to install
Fixed with a single hammer blow — much faster than conventional methods
For vertical and horizontal surfaces
Installed on ceilings, walls and floors alike — holding insulation firmly regardless of orientation
Specifications
| Material composition | Galvanised steel or SUS304 |
| Pin length | 35, 50, 75, 100 mm and others, by insulation thickness |
| Pin diameter | ∅2.5 – ∅4 mm |
| Clip (cap) | Dedicated fixing clip (metal or plastic) |
| Supply form | Boxed (1,000 or 5,000 pieces) |
| Main applications | Fixing glasswool, mineral wool and ceramic fiber insulation |
Applications
Glasswool installation
- •Fixing glasswool inside ducts and chambers
- •Pin fixing of insulation on flat surfaces and walls
Ceramic fiber installation
- •Pin fixing of insulation inside hot furnaces
- •Fixing ceramic blanket to ceilings
Mineral wool installation
- •Pin fixing of building insulation
- •Fixing acoustic panels to walls
Duct & chamber insulation
- •Fixing insulation inside HVAC ducts
- •Fixing insulation in heat-treatment chambers
Notes
- ※Choose a pin length at least two-thirds of the insulation thickness — too short and the hold is insufficient.
- ※Above 500°C, specify SUS304 pins — galvanised pins can oxidise at high temperature.