Basofoam Tape
−40°C to 200°C
Main applications
a dedicated self-adhesive tape that seals every joint
Key Features
Self-adhesive tape made for Basofoam
Bonds perfectly to polyolefin foam — sealing joints and cut edges airtight
Vapour- and water-tight joint sealing
Aluminum foil or foam based — completely blocking moisture and condensation entering through joints
Tear by hand, bonds instantly
Self-adhesive — no separate glue, simply pull to length and press into place
A wide service range
−40°C to 200°C — holding its bond across hot and chilled water and steam service
Essential for finishing pipe joints
Used to finish joints after Basofoam pipe sections and sheet are installed — the accessory that completes the job
Specifications
| Material | Aluminum foil with self-adhesive layer, or foam-based self-adhesive tape |
| Service temperature | −40°C to 200°C |
| Width | 50 mm, 75 mm, 100 mm (standard) |
| Length | 25 m, 50 m (per roll) |
| Adhesion | Self-adhesive, optimised for polyolefin foam |
| Main applications | Sealing joints on Basofoam pipe sections and sheet |
Applications
Basofoam pipe sections
- •Airtight sealing of pipe section joints
- •Sealing cut and worked edges
Basofoam sheet
- •Vapour sealing of sheet joints and overlaps
- •Edge finishing tape for sheet
Insulation finishing
- •Vapour-tight finishing tape over insulation
- •Finishing hot and chilled water pipe insulation
Repair work
- •Emergency repair of damaged Basofoam insulation
- •Re-sealing joints during maintenance
Notes
- ※For Basofoam specifically — use ALGC tape on glass fiber and glasswool insulation joints instead.
- ※Remove moisture and dust from the joint surface before application to maximise adhesion.